Comparing Battery Chemistries

Kia Soul EV Forum

Help Support Kia Soul EV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JejuSoul

Well-known member
Joined
Jul 8, 2015
Messages
1,796
Location
Jeju
-
This thread is to compare battery chemistries in different EVs. I am editing and updating this first post of the thread with complete details about the Soul EV battery. There is also a thread discussing the layout and position of the battery pack - Comparing the Soul EV battery with the Ioniq EV

The Soul EV has a battery by SK Innovation.
It has polymer pouch type cells, lithium nickel manganese cobalt oxide (NMC) cathode, a “special” ceramic separator with improved thermal resistance properties (presumably a wet separator by SK Innovation), high-capacity silicon/graphite (Si-C) anode and gel electrolyte additive materials. Each 40Ah battery cell has energy density of 200 Wh/kg

Press Release
=============
1./ Advanced battery for Kia Soul EV
2./ Kia pushes energy-density frontier with Soul EV battery

U.S. Advanced Battery Consortium Reports
=================================
3./ FY2014_APR_Energy_Storage_R&D (for SK Innovation E400 see printed pages 47-49, on screen pages 95-97)
4./ 2013USDRIVEAccomplishmentsReport (for SK Innovation E400 see printed page 32, on screen page 39)
5./ USABC_Final_Report_June_2014 (for SK Innovation E400 see printed pages E21-E23, on screen pages 145-147)

Lithium Ion Battery Components
6./ SK Innovation to Increase Production Capability of Lithium Battery Separator

-------------------------------------------------------------------------------------------

While looking for reasons why the Volt degrades less than the L eaf I found this info from Charles Whalen: (written in October 2010)
http://gm-volt.com/forum/showthread.php?5243-Volt-thermal-management-system-temperature-band/page2
Charles Whalen said:
"... the Volt’s and L eaf’s respective battery packs have nearly identical chemistry, both using a lithium-manganese cathode. They both have the same sensitivity to high temps. Out of all the various lithium cathodic chemistries, lithium-manganese is the most heat sensitive and has the highest and fastest rate of capacity decay and degradation at higher temperatures."

The L eaf’s battery cell is manufactured by NEC, is a pouch type cell with stacked elements, a LiMn2O4 cathode from Nippon Denko, a graphite anode from Hitachi Chemicals, a Celgard PP dry separator, and an EC type LiPF6 electrolyte from Tomiyama.

The Volt’s battery cell is manufactured by LG Chem, is a pouch type cell with stacked elements, a LiMn2O4 cathode from Nikki Catalysis, a hard carbon anode (which is more robust and has better/longer calendar life properties than the graphite anode in the L eaf’s battery cell) from Kureha, a Celgard PP dry/SRS separator, and a PC type LiPF6 electrolyte produced in-house by LG Chem.
 
Here is some information about a SK Innovation battery (page 35-37)
http://www.energy.gov/sites/prod/files/2014/05/f15/APR13_Energy_Storage_d_III_Adv_Battery_Dev_0.pdf

I do not know if it is related to the battery in the Kia Soul EV.

Summary:
SKI has evaluated LMO-free E400 and cycle life and calendar life will be continuously conducted until RPT10. Currently, based on capacity retention of 80%, cycle life is expected to exceed 2,000 cycles and calendar life of over 70weeks at 45C and 100% SOC –
SKI will estimate battery life with RPT10 data at the end of the program. SKI would like to continuously develop and modify cell design including electrolyte optimization and adjustment of cathode formulation in order to improve safety further.

And this article (E-9 till E-11) talks about the E250 type:
http://www.osti.gov/scitech/servlets/purl/1160224

EDIT: I think I am completely wrong, Kia Soul EV has NMC and not LMO.

Video's:
https://www.youtube.com/watch?v=AtJ9GoYUPyU
https://www.youtube.com/watch?v=rE3bHQTjKD0
https://www.youtube.com/watch?v=rE3bHQTjKD0
https://www.youtube.com/watch?v=2NfGFfWP2a4
 
ZuinigeRijder said:
EDIT: I think I am completely wrong, Kia Soul EV has NMC and not LMO.
I think your edit is wrong. You were right first time. The SK Innovation battery is LMO-free. That means it doesn't use LMO. Lithium Manganese Oxide (LiMn2O4). Instead it uses Lithium Nickel Manganese Cobalt Oxide (LiNiMnCoO2 or NMC)

Look at this page - http://www.batteryuniversity.com/learn/article/types_of_lithium_ion
Code:
Most Li-manganese batteries blend with lithium nickel manganese cobalt oxide (NMC) to improve the specific energy and prolong the life span. This combination brings out the best in each system, and the LMO (NMC) is chosen for most electric vehicles, such as the Nissan L eaf, Chevy V olt and BMW i 3. The LMO part of the battery, which can be about 30 percent, provides high current boost on acceleration; the NMC part gives the long driving range.
It seems NEC, LG Chem and Samsung SDI all use a combination LMO (NMC) whereas SK Innovation does not.

There is more info about the battery here - http://www.kiapressoffice.com/Release/35730

We had a discussion about the SK Innovation E400 cell before on this forum see - http://www.mykiasoulev.com/forum/viewtopic.php?f=14&t=386&start=10

------------------------------------------------------------------

The BMW i 3 has a new battery pack announced. According to http://insideevs.com/with-longer-range-bmw-i3-official-we-compare-the-new-94-ah-battery-to-the-old/
Code:
The BMW i 3 was previously equipped with 60 Ah lithium-ion battery cells (from Samsung SDI), that on the pack level stored around 21.6 kWh of energy (18.8 kWh were usable).

Now, the new 94 Ah cells are not only higher capacity, they are also more energy dense, so more energy is stored in a similar mass and volume – 33.2 kWh (27.2 kWh is usable).

There is also a rumour that the Sanyo cells inside the VW E-G olf will be increased from 28Ah to 37Ah later this year.

Is a similar improvement by SK Innovation likely to be announced soon.? The individual cells used by SK Innovation are currently 37.5 Ah
 
Then I have "must read" links if someone is interested in Battery Chemistries:

FY 2014 Annual Progress Report - Energy Storage R&D
http://energy.gov/eere/vehicles/dow...s-office-2014-energy-storage-rd-annual-report

The Energy Storage research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for projects focusing on batteries for plug-in electric vehicles. Program targets focus on overcoming technical barriers to enable market success including: (1) significantly reducing battery cost, (2) increasing battery performance (power, energy, durability), (3) reducing battery weight & volume, and (4) increasing battery tolerance to abusive conditions such as short circuit, overcharge, and crush.

This report describes the progress made on the research and development projects funded by the Energy Storage subprogram in 2014.

Past years' reports are listed on the Annual Progress Reports page. The document is very large; it has been divided into sections for easier use. The first section covers the Vehicle Technologies Office overview; the Battery subprogram R&D overview; Advanced Battery Development project summaries; and Battery Testing, Analysis, and Design project summaries. It also includes the cover and table of contents. The second section covers the summaries of the Applied Batteries Research for Transportation Projects. The third section includes Focused Fundamental Research project summaries, the list of contributors and collaborators, and a list of acronyms used.

Part 1 of 3 (256 pages), for SK Innovation E400 see pages 47-49, LG Chem see pages 26-30
Advanced Battery Development
Battery Testing, Analysis and Design
http://energy.gov/sites/prod/files/2015/04/f21/FY2014_APR_Energy_Storage_R&D_FINAL_Part1_of_3.pdf


Part 2 of 3 (242 pages)
Applied Battery Research for Transportation
http://energy.gov/sites/prod/files/2015/04/f21/FY2014_APR_Energy_Storage_R&D_FINAL_Part2_of_3.pdf

Part 3 of 3 (282 pages)
Focused Fundamental Research
http://energy.gov/sites/prod/files/2015/04/f22/FY2014_APR_Energy_Storage_R&D_FINAL_Part3_of_3_0.pdf
 
ZuinigeRijder: Good find. That testing data is a year more up to date than the 2013 version we had before.

"...capacity retention results show 86.1% of retention at 1,500 cycles..."

Am updating the first post in this thread with the best of these links.
 
Also the E400 results are described in the already mentioned document (pages E21-E23):
http://www.osti.gov/scitech/servlets/purl/1160224

Initial results indicate that when LMO- free E400 takes a purely drive mode, it can run more than 248,000 miles with 343kWh of energy throughput (per unit cell; 91.0MWh per pack system) based on 80% of capacity retention.

On 80% retention basis, LMO-free E400 can maintain 3.1 years, 3.6 years, 4.6 years, and 9.8 years in 30°C, Phoenix, Honolulu, and Minneapolis, respectively. This is the result result from SOC 100% storage, and when SOC conditions responding real life are applied, calendar estimated life will be much longer than this. From accumulated NCM cell experiences of SKI, calendar life of SOC 50% is approximately five times longer than that of SOC 100%, and calendar life of lower end SOC is approximately 20 times longer than that of SOC 100%. Thus, it is considered to last more than 10 years when real life SOC conditions are applied to LMO-free E400.

Firstly, LMO- free E400 satisfies the USABC goal for total pack energy of 40kWh and system specific energy of 150Wh/kg.
Secondly, based on capacity retention of 80%, cycle life is expected to exceed 2,000 cycles and calendar life is at least 100 weeks at 35°C and SOC 100% condition, which is far superior life performance and also exceeds the USABC life goal.
Thirdly, abuse tests were carried out and LMO-free E400 showed safe and stable behavior in thermal stability, penetration, short circuit and overdischarge tests.
 
ZuinigeRijder: Thanks for finding all these. I am updating the first post in this thread with the best links. I will comment about the cycle life testing in the battery ageing model thread.
 
The Chevy Bolt, Hyundai Ioniq EV and it seems Leaf v2 will all use an LG Chem battery. There is a quote by Carlos Ghosn at Auto China 2016 "Why are we working with LG Chemical? Because we think LG Chemical has the best performance." see https://newsroom.nissan-global.com/releases/transcript-from-a-media-round-table-session-with-carlos-ghosn-at-auto-china-2016

The new LG Chem battery does not have the same chemistry as the one described earlier for the 2010 Chevy Volt. At present the batteries for the Volt are produced at the LG Chem plant in Holland, Michigan. But the batteries for the Bolt will be built in South Korea at LG Chem's Ochang plant.

Will update this post when I find anything that states what the new chemistry is, and whether it is 'better' than the battery used in the Soul EV produced by SK Innovation. My first guess was that the reason Hyundai swapped from SK Innovation to LG Chem for BEV's was price. LG Chem is cheaper. But the quote by Carlos Ghosn states performance. Hyundai has always used LG Chem for their Hybrid and Plugin Hybrid vehicles.

In the USABC report the presentation about LG Chem's battery describes a PHEV battery. (The Volt is a PHEV). The battery is described as MRC = Manganese Rich Cathode. " The layered-layered compound xLi2MnO3(1-x)LiMO2 with reported capacities > 250 mAh/g. has one of the highest specific energies of any high voltage cathode materials currently being studied". It seems LG Chem's MRC PHEV battery has taken the opposite approach to SK Innovation's LMO-free.

The new LG Chem BEV battery chemistry may include parts licensed from 3M. see http://www.greencarcongress.com/2015/08/20150804-lg.html. It may also be a Nickel Rich Cathode if they use this patent - http://www.patentsencyclopedia.com/app/20150090925
Advantage of Nickel, cheap, "...LiNiO2-based cathode active materials are relatively inexpensive and exhibit high discharge capacity... "
Disadvantage of Cobalt, expensive, "LiCoO2 is widely used due to excellent lifespan characteristics and charge and discharge efficiencies. However, LiCoO2 is low in safety at high temperature and expensive due to resource limitations of cobalt as a raw material and thus there is limitation in price competitiveness. "

LG Chem's Nickel Rich Cathode is already being produced and is in the 2015 Chevy Spark. see https://avt.inl.gov/vehicle-button/2015-chevrolet-spark

Some numbers from the Tesla forum - don't know if they are accurate.
some quick numbers on the Bolt's battery pack. see - https://teslamotorsclub.com/tmc/threads/battery-for-ev-capacity-developments.46188/page-2 also https://teslamotorsclub.com/tmc/threads/lg-chem-120kwh-battery-packs-for-sale-to-manufacturers-looking-to-exceed-ms-range.47975/page-2

Gravimetric Energy Density: Bolt 138Wh/kg. (Tesla at 156Wh/kg)
Gravimetric Power Density: Bolt 0.37W/kg. (Tesla at 0.67W/kg)

The numbers are for the whole battery pack - eg . The 2012 Tesla Model S 85 kWh pack was 544 kg, which means it has gravimetric energy density of 156 Wh/kg.
The 2017 Bolt battery pack is 60 kWh and weighs 435kg -> Gravimetric Energy Density = 138 Wh/kg
The 2015 Soul EV battery pack is 30.5 kWh and weighs 202.8kg -> Gravimetric Energy Density = 150.4 Wh/kg

Good info here about the relative costs and availability of the metals needed in the battery. - http://www.bloomberg.com/news/articles/2016-06-23/elon-musk-is-squaring-off-against-china-for-the-future-of-tesla
It seems Cobalt is the most expensive and the most supply constrained. In the article "Tesla, which doesn’t use much cobalt in its batteries, is trying to get rid of it and add nickel". So it seems both LG Chem and Tesla are increasing the proportion of Nickel to Cobalt.
 
We have found a couple of reports about the cell testing of SK Innovation batteries before. They refer to E400 or E250 cells. We have never actually confirmed the cells, and the cell number. It seems to be E375 - seen on the cells here -



From this YouTube video

https://youtu.be/AtJ9GoYUPyU
 
-
While looking up info for the upcoming N iro EV I came across this article and links.

A Korean article in etnews gives more details about the NCM cells used in Li ion batteries.

It states the improvement in energy density from NCM622 to NCM811 is about 10%.
NCM622 cell energy density 180mAh/g compared to NCM811 cell energy density 200mAh/g
It also states that the new cells are due to a collaboration between SK Innovation and a company called Eco Pro.

Details on EcoPro cathodes here - High Technique Cathode Active Material for next generation



-----------------------------------

I also came across this article on NCM811 - Anisotropic Lattice Strain and Mechanical Degradation of High- and Low-Nickel NCM Cathod
In the near future, the targets for lithium-ion batteries concerning specific energy and cost can advantageously be met by introducing layered LiNixCoyMnzO2 (NCM) cathode materials with a high Ni content (x ≥ 0.6). Increasing the Ni content allows for the utilization of more lithium at a given cell voltage, thereby improving the specific capacity but at the expense of cycle life.
The downside of NCM811 is reduced cycle life

-----------------------------------

LG Chem which is also developing NCM811 bought its cathode supplier GS EM a few years ago, so now does this process itself.

LG Chem to buy research and patent assets in cathode material biz from GS EM

Samsung SDI which seems to be a year or two behind on this research uses a company called Umicore.
 
-
This post will give details on the NMC 622 cells currently being used in the Chevy B olt and 40kWh Nissan L eaf. NMC 622 has a higher energy density than previous chemistries. One problem though seems to be the higher energy density of the cathode, does not allow for a similar increase in charging power because of limitations in the anode.

Update: this also seems to be the cell used in the new K ona EV.

----------------------------------------------------

Using info from this article - Jaguar and Chevy have LG in common we can find the stats for the B olt EV cells.

Found this battery cell on sale at Alibaba - 3.7V 60Ah lithium polymer rechargeable battery for EV power tools





Having the exact size, weight and capacity of this cell will allow us to compare this current generation cell with the soon to be released NCM811 cell.

This cell appears to be the same one used in the Chevy B olt EV. - see Inside the factory building GM's game-changing Bolt EV



----------------------------------------------------

Info for the new Nissan L eaf can be found here - 2018 Nissan Leaf battery real specs

----------------------------------------------------

there's an interesting comment about charging speeds here - Tesla Forum: 2018 Nissan Leaf - $29,990. 40kWh battery
Renim said:
...
increase in range capacity comes with a decrease in max charge rate.
...
the core reason is that the anode powder (carbon) has a strong inverse relationship between charge rate and safety (plating)
...
 
-
At the recent EVTrend Motor Show in Seoul LG Chem displayed these 4 cells.
They didn't say what the last 3 are used for, but from the label color on the cell, the distance it travels and where it was made I have made the following guesses.
1/ Hyundai I oniq - Made in Korea.
2/ Chevrolt B olt - Made in Korea. - yellow sticker
3/ Jaguar I-P ace - Made in Korea ? Poland ?. - green sticker and power tabs offset.
4/ ??? Hyundai K ona or Audi E-T ron

see Audi e-tron vs Jaguar I-PACE battery pack comparison









I believe 2,3,and 4 are all the same dimensions and are all 60Ah, but presumably the chemistry is slightly different.
These 3 are all are the NMC622 chemistry, LG Chem has yet to start NMC811.

----------------------------------------------------------

The battery in our Kia Soul EV is also probably NCM 622. It has never been confirmed but this article SK Innovation rolls out advanced batteries states :



SK Innovation was the first in the world to succeed in the commercial production of advanced NCM 622 batteries.

---------------------------------

The battery cell used in the I oniq EV is probably LG Chem's LQ 1729-A2 43Ah Cell.
see: PDF datasheet for Lithium-Ion 43 Ah L3 LG Chem – LQ 1729-A2 Cell



192 cells * 43Ah * 3.75V = 30.96kWh which confirms that the total capacity of the I oniq EV is 31kWh.
The energy density of a single cell is 161.25 Wh / 0.966kg = 167Wh/kg
Hence it is probably not NMC622.

-
 
-
Reading through this thread again I want to make a guess about SK Innovation's naming scheme for their cells.

I think. (speculation for now - will add details as I find them)

E250 cell is a 25Ah cell. Perhaps this is the cell used in the Kia Ray EV. It is LMO / NMC. But the Ray EV uses 50Ah cells. I was hoping that they might be cell pairs.

E375 cell is a 37.5Ah cell. This is the cell used in the 27 kWh Kia Soul EV from June 2014 to June 2017. It is NMC622. (Called Nickel Rich or LMO Free)

E400 cell is a 40.0 Ah cell. This is the cell used in the 30 kWh Kia Soul EV from June 2017 May 2019.
It is also used for battery replacements of the first generation cars.

Cell production for this new cell began in Feb 2016, more than a year before the 30kWh version of the car was released.

-------------------------------------------------------------------------

SK Innovation has a patent for a 25Ah cell here - Electrolyte for Lithium Secondary Battery and Lithium Secondary Battery Containing the Same
...A film separator made of a polyethylene (PE) material and having a thickness of 25 μm was stacked between the prepared electrodes, and a cell was configured using a pouch having a size of 8 mm×270 mm×185 mm (thickness×length×width), followed by injection of the non-aqueous electrolyte, thereby manufacturing a 25Ah-class lithium secondary battery for an electric vehicle (EV).

Performance of the 25Ah-class battery for an electric vehicle (EV) manufactured as described above was evaluated as follows. Evaluation items are as follows...

A research paper discussing the Ray EV battery temperature dynamics here -
Battery Pack Temperature Estimation Model for EVs and Its Semi-transient Case Study
It states the Ray EV battery cell as 50Ah, 3.7V
We know the Ray EV has 88 cells in 12 modules. 50Ah * 3.7V * 88 cells = 16.28kWh
But it could be there are 88 cell pairs where each cell is 25Ah

heata8u2d.png


-------------------------------------------------------------------------

There's a really good report on NMC811 here - What do we know about next-generation NMC 811 cathode?
 
-
I now have some circumstantial evidence to back up this speculation -
JejuSoul said:
E375 cell is a 37.5Ah cell. This is the cell used in the Kia Soul EV from June 2014 to June 2017. It is NMC622. (Called Nickel Rich or LMO Free)
E400 cell is a 40.0 Ah cell. This is the cell used in the Kia Soul EV from June 2017 onwards.
Battery replacements for the first generation Kia Soul EVs are being done with second generation cells. There is about a 10% increase in energy capacity. Replacement packs have the same number of cells, in the same layout. Same physical size.

Shouldn't really be a surprise to see a 10% increase in performance with a chemistry that is 2 years newer.
I assume all these cells will be NMC622.
I have no idea yet if the life expectancy of these newer cells will be more / less / similar to the first gen.
 
-
Have found a couple of new pics showing the latest battery cells for both LG Chem and SK Innovation.

SK Innovation now seems to have an E600 cell. Presumably this is the 60Ah cell used in the N iro EV and 2020 Soul EV.




LG Chem's latest cell is called the E63. This is advertised on ailibaba as a 63Ah cell.

 
Back
Top