Neel
Posts: 58
Joined: Sun Sep 01, 2019 5:12 am

for SOH % is torque value correct ? or SoulSpy ?

Mon Nov 04, 2019 7:24 am

hi experts ?
my 2016 Soul EV , with bluetooth adaptor ELM327 , it reads perfect in torque and loads data , but soul spy it partially load data and SOH% - Unknown Detorioration (not sure why) , but it detect vin# , mfg year , DTC code , tirm etc, but nothing else, is it possible that this ELM which support torque pids , not suitable for soulspy ? just curious ,
at present , my car is 115000KM , with level 2 ( 220v/16Amp ) 100% charge GOM is 126KM (no climent control) with heat on its (116KM )
couple of time i charge with level 1 , and it reach 136KM
torque data is here - with 30kwh extended pids , is it correct for 2016 or should i use 27kwh extended pids ?
Max kwh - 26.8
SOH in KWH - 28.8
lost Soh - -1.2 kwh
soh in % - 96.1
lost Soh - 3.9%

thanks in adavance , help appriciated

JeroenE
Posts: 109
Joined: Fri Sep 18, 2015 9:46 am
Location: The Netherlands

Re: for SOH % is torque value correct ? or SoulSpy ?

Mon Nov 04, 2019 7:54 am

SoulSpy doesn't work with all the OBD dongles that Torque does.

A very quick but slightly inaccurate way to determine the SoH is to find your maximum deterioration. Then deduct that number from 110. So for example if your max. det. is 20 your SoH would be 110 - 20 = 90%

Neel
Posts: 58
Joined: Sun Sep 01, 2019 5:12 am

Re: for SOH % is torque value correct ? or SoulSpy ?

Mon Nov 04, 2019 1:13 pm

JeroenE wrote:SoulSpy doesn't work with all the OBD dongles that Torque does.

A very quick but slightly inaccurate way to determine the SoH is to find your maximum deterioration. Then deduct that number from 110. So for example if your max. det. is 20 your SoH would be 110 - 20 = 90%



thank for explain , i already order KONNWEI KW902 , once i received will get true data .

Return to “Technical Discussions”