Usikker
Posts: 80
Joined: Mon Nov 06, 2017 11:56 am
Location: Norway

Re: Soul Spy?

Tue Feb 27, 2018 9:01 am

Question about SoulSpy..
When you see the logfiles.... soulspy.logDateTimestamp and SoulData.DateTimestamp

Is it possible to make DateTime first and then Soulspy and SoulData

Reason for question is ... when you have a lot of files in a folder it is easier to sort them based on DateTime

Sample:
201802061501.soulspylog.txt
201802061501.SoulData.csv
Kia Soul EV 2018, 30kWh :shock:

langemand
Posts: 37
Joined: Tue Mar 29, 2016 3:06 pm
Location: Greater Copenhagen Area, Denmark, Europe
Contact: Website

Re: Soul Spy?

Wed Feb 28, 2018 10:48 pm

Usikker wrote:Reason for question is ... when you have a lot of files in a folder it is easier to sort them based on DateTime


It is usually possible to sort the listing by the operating system's timestamp for the file.

What are you trying to achieve by listing the log and data files next to each other?

Perhaps there is a better way to achieve it, than using different file names.
Kia Soul EV since december 2015: http://soul.spjeldager.dk/
Nissan Evalia september - december 2015: http://evalia.spjeldager.dk/
Peugeot 106 Electric may 2010 - august 2015: http://elbil.spjeldager.dk/

Usikker
Posts: 80
Joined: Mon Nov 06, 2017 11:56 am
Location: Norway

Re: Soul Spy?

Thu Mar 01, 2018 11:48 am

My problem is/was that when I transfered 40 files from my pad to computer via bluetooth they all got almost the same time stamp as a file attribute and then when you sort them you will see all SoulData#### first and then soulspy.log#### and now I have to look at the #### to find the pair of SoulData and Soulspy.log

No big deal... I have sorted them now
Kia Soul EV 2018, 30kWh :shock:

langemand
Posts: 37
Joined: Tue Mar 29, 2016 3:06 pm
Location: Greater Copenhagen Area, Denmark, Europe
Contact: Website

Re: Soul Spy?

Thu Mar 01, 2018 1:51 pm

You did not answer my question: What do you achieve by getting them sorted in pairs?

Usikker wrote:My problem is/was that when I transfered 40 files from my pad to computer via bluetooth they all got almost the same time stamp as a file attribute and then when you sort them you will see all SoulData#### first and then soulspy.log#### and now I have to look at the #### to find the pair of SoulData and Soulspy.log

No big deal... I have sorted them now
Kia Soul EV since december 2015: http://soul.spjeldager.dk/
Nissan Evalia september - december 2015: http://evalia.spjeldager.dk/
Peugeot 106 Electric may 2010 - august 2015: http://elbil.spjeldager.dk/

Usikker
Posts: 80
Joined: Mon Nov 06, 2017 11:56 am
Location: Norway

Re: Soul Spy?

Sat Mar 03, 2018 7:11 am

From my personal point of view;

When you have files that "belong" to each other with raw data and result data I find it easier to keep them together in pair

SoulSpy create SoulData.20171230_1259.csv files and soulspy.log201712301259.txt files and when you then have like 40 files in the folder and sort them by name you will get all SoulData#### files first and then all soulspy.log#### files after that

As long as they are stored on my tablet I can keep them sorted the way I like based on time/date in the file attribute but when I copy/move them to my computer they all get the same date and almost the same time stamp.

So if the two sample files above had started with 20171230_1259.SoulData.csv and 201712301259.soulspy.log.txt they had been a pair when you sorted them based on filename
Kia Soul EV 2018, 30kWh :shock:

langemand
Posts: 37
Joined: Tue Mar 29, 2016 3:06 pm
Location: Greater Copenhagen Area, Denmark, Europe
Contact: Website

Re: Soul Spy?

Sat Mar 03, 2018 12:32 pm

What is easier? What is it you achieve, aside a sense of order?
Kia Soul EV since december 2015: http://soul.spjeldager.dk/
Nissan Evalia september - december 2015: http://evalia.spjeldager.dk/
Peugeot 106 Electric may 2010 - august 2015: http://elbil.spjeldager.dk/

djirik
Posts: 1
Joined: Tue Apr 24, 2018 11:49 pm

Re: Soul Spy?

Thu Apr 26, 2018 5:11 am

Hi, we are group of students from Russia, currently working on project with Kia Soul EV.
We are trying to manipulate can bus messages, but we only can see PID up to 690 on C_CAN, I guess it is only for diagnostic data.
However many commands (beams, door lock) are at 700+ PIDs. Can you give us some hint how can we access those PIDs, please?

JejuSoul
Posts: 1128
Joined: Wed Jul 08, 2015 6:47 am
Location: Jeju
Contact: Website

Re: Soul Spy?

Sat May 12, 2018 3:47 am

-
Am now looking at some data from a really new 2018 Soul EV . It is showing Max Det = zero and Min Det = 100%.
This is not the same behaviour as all previous Soul EVs. Including earlier 2018 models. It is the same as the I oniq EV.
In that car Max Det and Min Det have been removed and instead it shows SOH in the same position.
The codes for using Torque Pro can be found by clicking the link in the website icon under my user name on the left.

BigEdgar
Posts: 24
Joined: Mon Sep 07, 2015 9:47 pm

Re: Soul Spy?

Sat May 19, 2018 10:07 am

Hi everyone,

I have a 2016 Soul EV and have a few questions about Soul Spy. I've read through tons of this thread, but I'll be honest - I'm still confused as to how to read some of the results. I'm trying to understand how much capacity my battery has lost. We've had the car for 2 years and 8 months and have only put about 15k miles on it (we're in the Pacific NW in the US, so generally a friendly climate for these batteries).

After charging to 100%, Soul Spy tells me the following:

Code: Select all

battery.SOC_display_pct = 100
battery.SOC_pct = 95


Should I read this as the overall battery has lost 5% of it's total capacity?

Here are the stats regarding max/min deterioration:

Code: Select all

battery.max_cell_deterioration_pct = 8.7
battery.min_cell_deterioration_pct = 6.8


And here are some images from the app:

https://imgur.com/a/KDEaTKT

https://imgur.com/a/LOL88q4

Thanks for any guidance!

JejuSoul
Posts: 1128
Joined: Wed Jul 08, 2015 6:47 am
Location: Jeju
Contact: Website

Re: Soul Spy?

Sat May 19, 2018 7:14 pm

-
Your battery is in great shape. You have lost some of the buffer at the top but the usable capacity is 100%.
The thread for discussing battery data is here - Battery Ageing Model

SoulSpy is still under development. It would be great if it could be the main app that people use to get the battery data, but for now most of us are still using Torque Pro.
The codes for using Torque Pro can be found by clicking the link in the website icon under my user name on the left.

Return to “Technical Discussions”