today after bit longer drive than normal , 50 KM one way , i have check EV light pop
i restart the car and it gone , it come back after 5 minute , so i stop again
i plug my konnwei and start soulspy to check , no any code show even check ev light ON .
so i decided to check with Torque app to see if it shows something
and torque shows P1BA1 - powertrain
but i feel nothing while driving / no turtle or anything
while google this P1BA1 - is specific for hybrid / electric car is main battery interface control module
link - https://www.autocodes.com/p1ba1.html#:~ ... %20Voltage
car is - 2016 kia soul (Ex- Teo taxi)
millage - 125500KM ( no warranty left)
battery SoH - 94.5% (60% SOC) - 96.6%(100% SOC)
since last 2 month i charge 80% - GOM 109-113 KM
as today to bit long drive i decided to charge 100% - GOM shows 150KM
as this battery SOH with GOM are respectively OK ? or battery interface control module may have issue as per -P1BA1 code pops ??
is there anyway i can reset this BICM (battery interface contron module )
anyone has encounter this issue ? help appriciated , thanks in advance